Saturday, December 17, 2011

The Pros and Cons of Low Energy LED Lighting

!±8± The Pros and Cons of Low Energy LED Lighting

For most people, probably the biggest single factor against low energy LED lighting as a substitute for the soon-to-be-phased-out regular incandescent light bulb is the cost differential. There is no doubt that an LED equivalent light bulb (for example a 6w LED spotlight as a direct replacement for a 35w GU10 halogen lamp) is significantly more expensive than either the original or a CFL alternative.

There are however three important points to bear in mind about the higher price for low energy LEDs as compared to incandescent and energy saving CFL light bulbs.

First, the price difference reflects the fact that the use of LED for general purpose domestic lighting is still quite novel, though increasing manufacturing levels and consumer take-up will drive the price down dramatically once both come fully on stream over the coming months.

Second, and partially related to the observation above, is that the cost of LEDs drops by a factor of twenty over the course of each decade. This characteristic is reliably predicted by Haitz's Law (very similar to Moore's Law for computer chips and for similar reasons, principally because LEDs are, just like computer chips, pure electronic devices). Haitz also states that LED performance (amount of light per watt of electricity) increases tenfold over the same decade.

Third and perhaps most intriguing is the fact that as far as the cost of domestic lighting is concerned, the price of light bulbs is almost entirely irrelevant. It is an extraordinary yet easily provable fact that even if regular light bulbs were totally free and LED lights cost, let's say something outrageous like each, it would still be vastly more economical to purchase LED low energy lights.

The reason for this is simple: the cost of electrical lighting is the cost of the energy i.e. electricity. It matters not one jot what the actual light bulbs cost; it's what it costs to run them that really counts. Also, since LEDs last for tens of thousands of hours (in practice, decades of use) you only need to pay the purchase price once, unlike regular bulbs which last only upto two thousand hours or just over one year.

The second biggest gripe about low energy LED lighting is light levels and quality, or in technical parlance luminosity and light color.

The concern about luminosity stems largely from historical notions of LED lighting applications such as LED Christmas lights and pocket torches which are clearly not capable of providing anything close to useable domestic lighting. However, you could right now purchase one of the latest Sharp Zenigata LED series of light bulbs which is rated at 80 lumens per watt (measure of luminosity).

To understand what this means, consider that a standard 40w incandescent bulb delivers about 360 lumens and a 60w bulb about 540 lumens, which gives a ratio of 9 lumens per watt. Anything that offers greater than 25 lumens per watt can be classed as an energy saving light bulb. Zenigata LED light bulbs consume 6.7 watts and thus produce 6.7 * 80 lumens per watt which is 536 lumens, on a par with the standard 60w incandescent light bulb.

So you could, right now, replace all your 60w light bulbs with Zenigata LED light bulbs rated at 6.7 watts and consume 1/10th (or 90% less) electricity. And remember Haitz's Law? Because of performance improvements, eighteen months from now you should be able to obtain the same 60w worth of lighting from just 3 watts.

LED light, in common with CFLs, has tended to be a somewhat cool blue colour, whereas we are more accustomed to a warmer yellow white colour. This is something that is now commonly addressed with the use of colored phosphors (these do reduce luminosity but this is in turn compensated for by the ever increasing lumens per watt yields for LEDs).

The third factor that might be considered to weigh against low energy LED lighting is that the light emitted by an LED is intrinsically directional and doesn't scatter in all directions the way that incandescent and fluorescent lights do. This is actually quite acceptable in a spotlight, flood light or bright reading lamp, but it's not especially effective for emulating general ambient lighting such as a table lamp would provide. Though again, there are LED powered general lighting light bulbs becoming more commonly available that do a reasonable job here.

Two obvious plus points for low energy LED lighting are ease of retrofit and ecological credentials (other than simply saving energy).

LED lights are widely available for all common base fittings such as mains powered GU10 and 12v MR16 spotlights and the low energy standard base GU24 as well as regular bayonet mounts and Edison screw fittings. LED lights also don't suffer from the many inherent problems associated with CFLs such as: noticeably poor start-up times; reduced lifespan caused by frequent switching on and off; and bulky unattractive bulbs.

But perhaps one of the most widely known advantages of low energy LED lighting over energy saving CFL light bulbs is that they don't contain toxic mercury vapour or other unpleasant materials, and thus do not pose a serious health risk or require tiresome and expensive disposal procedures to protect the environment.

To sum up, the main perceived disadvantages of domestic energy saving LED lighting are cost and application (luminosity and color). Yet as we have seen, the cost of a light bulb is actually a red herring - the true cost of electrical lighting is the price of electricity and on this score ultra low energy LED lighting puts everything else, including energy saving CFLs, completely in the shade (pun intended).

As regards luminosity and light quality, LED lights on balance deliver a cleaner, sharper light than CFL light bulbs and offer far more flexibility in terms of color choice and brightness.

Finally, the biggest advantage that low energy domestic LED lighting has over its rivals is that the lighting industry itself regards domestic LED lighting as the future and can barely disguise its contempt for CFLs. Lighting giants such as Philips are on record as stating that they will not invest a single dollar further into CFLs and that their entire research and development efforts are now directed at domestic LED lighting technology.

Those who follow eco-technology trends are well aware that there is a world-wide phase-out of incandescent light bulbs already well underway and scheduled to complete within the next couple of years. Given international legislation to ban incandescent lighting and lack of support for the already dated and unloved CFL, it's near certain where the future of lighting lies - with low energy LED light. And as advantages go, I'd say that one's pretty compelling.


The Pros and Cons of Low Energy LED Lighting

Lowest Price Used Polaris Atv Tri Fold Futons Immediately Makita Btd144 Buy Now

Sunday, December 11, 2011

Comparing Light Bulb Types - Incandescent, Halogen, and Compact Fluorescent Lamps

!±8± Comparing Light Bulb Types - Incandescent, Halogen, and Compact Fluorescent Lamps

Incandescent Bulb

The fat bulbs that most of us have been using for general lighting in bedrooms since childhood are known as incandescent light bulbs. These lamps have been the standard for a long time due to the natural, warm light they produce and their undeniable low price. These bulbs are also very easy to put on a dimmer control in comparison to other lamp types.

The main problem with incandescent bulbs is that they consume two to three times more energy than the alternatives. This coupled with a much shorter lifespan (up to 1,500 hours) than its competitors makes incandescent bulbs an expensive option. This has led to a worldwide movement to ban their use before 2014 for the sake of energy. Some countries, including those in the European Union, have already begun this ban.

Halogen Bulb

Halogen bulbs are a type of incandescent lamp that produce an intense light with higher color temperatures than non-halogen incandescent lamps. Halogens are most often used in track lighting systems, ultramodern light fixtures, and, believe it or not, headlights. The intensity of the light makes halogen lamps a good choice for task lighting. Halogen light bulbs tend to initially cost more than non-halogen incandescent bulbs but make up for the difference with a longer lifespan (2,000 to 2,500 hours) and higher energy efficiency.

The trouble with halogen bulbs lies in the fact that they produce a lot of heat. This makes halogen lamps a bad choice for workspaces in close proximity to a halogen lamp or for children's rooms due to safety issues. Note that you should never touch a halogen lamp with bare hands or leave flammable materials nearby. It is best not to leave with these lamps on for an extended period without someone close at hand.

Fluorescent Bulb

You more than likely associate fluorescent lamps with the long fixtures found in kitchens, laundry rooms, and garages. The fact is that fluorescent lamps comes in many different shapes and sizes and can be used for diverse purposes and in various light fixtures. Fluorescent lamps produce a large amount of white light that reveals detail without producing excess heat. This together with a low operating cost makes fluorescent bulbs a ideal choice for work areas. The lamps themselves tend to cost more than both incandescent and halogen bulbs since a ballast is required for the function of a lamp. However, fluorescent lamps last ten to twenty times longer (up to 25,000 hours) than incandescent lamps and is the most energy efficient of these three types, though the life of fluorescent bulbs may lessen if it is turned on and off frequently. Note that the life of a fluorescent bulb should be indicated on the packaging.

One downfall for the fluorescent lamp is that it produces a very white light that does not seem as natural or warm as an incandescent bulb. This light has also been connected with the fading of paintings since it contains a high amount of UV rays. You may also notice that the bulbs become dimmer towards the end of their life and may not turn on in extremely cold temperatures. Fluorescent bulbs have also been accused of being harmful to the environment due to the mercury and phosphor materials contained inside. Because of this used fluorescent lamps typically cannot be disposed of as regular trash. The disposal procedure is usually regulated by local government agencies.

Compact Fluorescent Bulb (CFL)

This type of fluorescent bulb has been offered as a replacement for the incandescent bulbs that may be banned by 2014. They are closer to incandescent bulbs in size but retain the energy saving properties.The two most common shapes are U-shaped and spiral. Recent developments have also led to a light that is more natural and similar to the light produced by incandescent bulbs.

Making the Switch to CFL Bulbs

There are a few things that you should consider when converting to compact fluorescents.

Size

Though smaller than standard fluorescent lamps, compact fluorescent bulbs are nevertheless larger than incandescent bulbs. It is important to consider this since a compact fluorescent bulb might be to large for some of your fixtures.

Wattage

A fluorescent lamp produces five times more light than an incandescent of the same wattage. So if you are using a 100-watt incandescent lamp to light a room, a 20-watt compact fluorescent will produce roughly the same amount of light.

Light Temperature

The light produced by fluorescent bulbs typically has a bluish white quality that may not seem as natural as light from incandescents. You can get an idea of the color by taking a look at the color temperature indicated on the package. Light from an incandescent bulb typically has a color temperature of 2,700 K, so if you want a more natural light, you should purchase a compact fluorescent lamp of that same temperature. Bulbs with a temperature of 3,000 K to 3,500 K produce a neutral white light. Anything above 4,000 K will be closer to daylight.

In Conclusion...

There are actually many more types of light bulbs than the three described here. However these are the most popular for interior lighting. Less common types include LED (light emitting diode) and HID (high intensity discharge). Choosing the right light bulb is all in all a matter of preference and savings. Well, that goes for all but the ill-fated incandescent bulb...


Comparing Light Bulb Types - Incandescent, Halogen, and Compact Fluorescent Lamps

Proform Elliptical Cross Trainer 800 Clearance Sale Oxygen Concentrator Invacare Guide Promotion Planet Waves Chromatic Tuner

Tuesday, December 6, 2011

Tuesday, November 22, 2011

See the Light

The Ampolo Five follows. Much less harmful than the Jackson 5. Please take a moment to answer these by clicking on the "comment" option below this post. 1. Do you use CFLs in your home? 2. If not, why not and what would it take to persuade you to use them? 3. If so, in which room(s) do you use them? 4. If so, what have you found to be the pros and cons of the CFL? 5. Any thoughts on an efficient way to dispose of used CFLs (which do have mercury)?

Saving Medela Shoulder Bag Coil Garden Hoses Fast

Sunday, October 23, 2011

EPA Warns Public About Mercury Hazards in CFL Light Bulbs

Cuisinart Em200u Sale

Thursday, October 13, 2011

Our E-Waste Dilemma - How to Responsibly Dispose of Old Electronics

!±8± Our E-Waste Dilemma - How to Responsibly Dispose of Old Electronics

There is no quick and easy answer to the question of what to do with all of our throw-away electronics, but one thing is for sure - it is an ever-growing issue and we all need to act responsibly with the disposal of our E-waste.

According to Stateline.org an online publication and independent element of the Pew Research Center: There is no precise estimate of how much E-waste is piling up in the nation's landfills, but the National Safety Council estimates that 500 million defunct computers and monitors will be discarded by 2007. California's environmental protection agency estimates 6 million monitors are stacked in state homes and offices waiting to be tossed.

We cannot just toss these items into the garbage and forget about them, and here is why. All of our electronic components contain varying levels of toxic substances, such as mercury, lead and polyvinyl chloride, just to name a few, which will leach out into our groundwater, if they end up in landfills.

The electronic age is here to stay, so what are we to do with the inevitable, and growing collection of broken or out-dated equipment?

Federal and State environmental laws are being written and revised to include guidelines for correct disposal of electronic equipment that is at or near the end of its useful life. In California, the Electronic Waste Recycling Act of 2003 (SB20 / SB50) establishes a funding system for the collection and recycling of certain electronic wastes. The California Integrated Waste Management Board has adopted regulations to implement portions of the statute.

~ Key elements of the Electronic Waste Recycling Act include:

~ Reduction in hazardous substances used in certain electronic products sold in California.

~ Collection of an electronic waste recycling fee at the point of sale of certain products.

~ Distribution and recovery of recycling payments to qualified entities covering the cost of electronic waste collection and recycling.

~ Directive to recommend environmentally preferred purchasing criteria for state agency purchases of certain electronic equipment.

For the individual and small business consumer this program is intended to enhance the availability of convenient recycling options so that products containing toxic compounds are not disposed of inappropriately.

The dilemma arises as the richer countries pass legislation regulating the disposal of
E-waste, and the "recycling" business turns out to be more of an "export" business to third-world countries. An ABC News 20/20 segment on Jan 1, 2006, reported that
80% of scrap electronics from the US ends up offshore, where workers extract the few desirable parts and leave the rest in mountains of plastic and twisted parts to pollute the environment. There are also issues of worker safety in these so-called recycling plants.
Employee safety concerns are substandard, and in many cases, workers are unaware of the hazards they are being exposed to.

So, just what is the right thing to do, you ask.

Reduce -

Be responsible about your purchases.
Maybe you can up-grade your computer, rather than toss it and buy a new one.
Purchase from responsible manufacturers. Dell, HP and Apple offer free take back and recycling programs.

Reuse -

Donate equipment that is still functioning to non-profit organizations, schools or churches.

Recycle -

Items that cannot be repaired can be recycled through reputable companies.

Before you donate, or recycle your PC or cell phone be sure to clear the memory of any personal data. Simply deleting the files from your desktop does not clear the hard drive. There are software programs to overwrite the disk, you can reformat the hard drive and re-install the operating system, or the more drastic route is to physically destroy the hard drive by removing it from the housing unit and smashing it with a hammer.

E-waste is the fastest growing part of municipal waste streams, and rising almost three times faster than the overall waste stream, according to the EPA. We, the purchasing public, need to not only be aware of the consequences of our consumer driven culture, but be responsible for our individual contribution to the problem, and be willing to step up to the plate to do the right thing.

The following is a partial list of items that should NOT go into the garbage can:

Fluorescent lamps & bulbs, including CFLs (compact fluorescent lights)

ALL batteries

Computer monitors and TV sets

Computer hard drive

Printers & Fax Machines

Cell phones

VCRs

Radios

Microwaves

Cordless phones

Telephone answering machines

Some communities offer Hazardous Waste Recycling events once or twice a year, which makes the disposal of these items easy and safe. Call your city offices or go online and research the donation, recycling or disposal options for your area. Also, visit your State's website for information about laws and regulations that may apply to you and your business.

For those of you with an entrepreneurial spirit, this may look like an opportunity - to develop solutions that are earth-friendly and people-friendly. We need convenient and safe disposal for even the laziest of us consumers.

While this is a vast and complex issue, if each one of us makes the effort to be as educated as possible, understand the power of our purchasing choices, one by one we do have enormous impact. Visit the web sites below for more in depth information and resources for the proper disposal of your E-waste.


Our E-Waste Dilemma - How to Responsibly Dispose of Old Electronics

Cheap Ivf Success Rates !8!# Promo Portable Digital Recorders

Monday, September 5, 2011

Money-Saving Kitchen Tip: Turn this old freezer to a refrigerator with high efficiency

!±8± Money-Saving Kitchen Tip: Turn this old freezer to a refrigerator with high efficiency

I know it's pathetic that at the age of almost-60, I know next to nothing about electricity. I know that compact fluorescent bulbs use less than, even if CFLs are environmentally friendly picnic. So we changed most of the lamps by Taylor Springs, NM.

I also know of phantom power, the power you have with yourself when things like TV, are "off". So, here I am writing this book, I got up and went to close the power strips and UPS TVconnected, and the fan and the power cable for satellite radio indoors. None of these devices in use during the day, when I'm home by myself, so why should pull juice.

But the only device that is running all the time, if he wants, and is the biggest energy gobblers, and the least efficient of all is - the refrigerator. We have an old Crosley, the Energy Star rating older. We have a Kill-a-Watt meter ($ 25 for all), soI do not know exactly how much electricity you use, but I'm sure that there is more than $ 100 per year, perhaps much more, and it is stupid.

I always knew that the refrigerators to the design, do not work well. You're cold by removing heat through coils and compressors and motors and fans, heat vent in the kitchen, which helps in football during the summer in the A / C. And every time the door of the refrigerator or freezer, you dump all the cold air from the device and forces him to run again.Insane.

I read about the conversion of a top-opening freezer for use as a refrigerator. Making sense: they are better than the normal stand-up fridges, insulated and because they open from the top, which remains cool to the inside instead of running on the floor. I have seen a change in use, in an off-the-grid home in Indiana, and it worked fine, but as I said, I'm not much of an electrician, I never did my refrigerator chest. Yes, they are smaller than most freezersrefrigerators, but it tends to have a lot of stuff in the fridge that could hold and must be kept in place in the pantry. And we tend to only put things in the refrigerator in all directions, a little 'organization and security do not kill us, especially if it results in a permanent savings.

So I had on my to-do-written sheet "freeze", and began poking around the internet to see if I could use a meter cheaper to convert a small freezer chest are coolingUnits, and save a bundle of energy ... and money.

And voila. In addition to Mikey Sklar and Wendy Tremayne Jehanara site, http://blog.HolyScrapHotSprings.com "Digital & homesteading do all our stuff in Truth or Consequences, New Mexico," I have a $ 49 plug-in control unit by Mikey to refrigerators, freezers, to convert. Sklar says it will reduce the energy consumption of $ 100/yr. less than $ 10/yr., the device pays for itself in about six months.

And with 200 millionRefrigerators in the U.S. alone, the savings are mammoth, both in dollars and the cost to the environment. Let's see, which is 200 times 100 million per year, which is 20 billion dollars a year in electricity, we could cut $ 2 billion, only with the installation of a plug-in into a $ 50 gadget freezer used. The need for the equivalent of a power plant or two, be easy. A no brainer, no home should be without.

By isolating the front and side, so that the room where the air intakeat the bottom, and not for the back up to where the heat is released, you can use energy more costs. Have you ever heard the side of the refrigerator, and I noticed that you can always cool down a bit '? This is because, though the walls and doors are insulated, are not sufficiently isolated, and a simple polystyrene panels and housing is certainly a useful addition.

So, as environmentalists and greedy, I finally have this conversion on my Christmas wish list. There areused a device that stores up to Raton, I go to the vet for a low cost of labor and freezer. Free or cheap at a yard sale would be good.


Money-Saving Kitchen Tip: Turn this old freezer to a refrigerator with high efficiency

Dyson Best Prices Compare Saved Chicken Jerky Dog Top 10 Viewsonic Projector Lamps

Sunday, August 28, 2011

LED lamps with energy saving lamps

!±8± LED lamps with energy saving lamps

View

Environmentally friendly options for replacing light bulbs are usually compact fluorescent lamps (CFLs) or Light Emitting Diode (LED) lamps.

Compact fluorescent lamps

Energy saving lamps are similar to conventional fluorescent lamps, which uses electricity to mercury vapor that is in the glass tube to activate. The actual impact on the atoms of mercury with ultraviolet light (UV), does not make them visible to the naked eye. The photons from ultravioletThe light hit a phosphor coating inside the lamp emitting photons of visible light, light emitted from the tube. Ultraviolet light can cause discoloration in the images or textiles. The mercury in the lamp means that the bulbs to be disposed of properly, such as compact fluorescent burst deposited in landfills, the mercury is released into the soil drainage, contamination of the food chain to the end. Some states, like California, the ban on the disposal ofmercury-containing lamps in the trash. Some state laws require the collection of fluorescent lamps as hazardous waste or recycled properly. Check with the EPA place to ensure proper disposal procedures for your condition, or you can find a recycling center in your area Earth911.

Unlike fluorescent tubes, which are not integrated circuits, compact fluorescent lamps, in general, all the circuitry required at the base of the light from the single device used in a standardBulb light socket. Compact fluorescent lamps in a variety of styles and forms, but often are seen in a tube or spiral. Larger surface area allows more light output in compact fluorescent lamps.

LED Lighting

Solid-state lighting, better known as known LED (Light Emitting Diode) lighting is an integral part of the semiconductor light source that is not a gas pipe as the CFL. Light from an LED is when the current is applied across the semiconductor doped with impuritiescreating half, the "p-side", the other half, the "n-page" forms. The charge carriers (electrons and holes) flow into the pn junction where the two halves to meet, and releases energy in the form of a photon, so light. The color of light emitted depends on the materials forming the pn junction. There is no filament to burn out, and in contrast with energy-saving lamps, LED lamps do not contain toxic mercury, no ultraviolet light.

An emission of light, many elderlyModels of LED lamps have many individual LEDs used in a home, driving many of the new LED lights feature a single high-power LEDs. These LED lamps are much smaller than their counterparts in the CFL, and are offered in the form factors to produce a directed beam of light provided by the use of a lens of glass or plastic, and enclosed behind a frosted diffuser broader lighting .

Summary of benefits

Less expensive powerBill:

Although the cost of the bulbs are more expensive initially, CFL and LED bulbs save money in the long term. Less electricity is used, and the lamps are replaced less frequently. LEDs consume about half the amount of current compact fluorescent lamps, which use the same light output.

Long term:

Execution times of the CFL bulbs typically range from 6,000 hours to 15,000 hours, while the typical lifetime of a bulb is about 1,000 hours. An LED bulb can last50000-60000 hours, which equals about 5 or 6 years (10 times longer than a CFL).

High-quality lighting performance:

Both CFL and LED lamps, now offers a range of color temperatures. Consumers are no longer limited to blue, "cool white" bulbs of the past and can now warmer colored lamps. Inferior quality CFL bulbs, which use a magnetic ballast flicker. Look for an electronic ballast when you buy a CFL. The LEDs are controlled so as not toflicker.

Versatility:

Interior, exterior, home or commercial LED and CFL bulbs can be used in many different types of applications where traditional light bulbs were once used. LED lamps and compact fluorescent lamps can be used in track lighting, table lamps, outdoor lighting, recessed lights and ceiling lights. Both types of lamps are dimmable models for use with a dimmer standards.

Duration:

Because the LED bulbs do not use a filament like incandescent lamps,They are shock resistant and can be used in high vibration.

Summary of disadvantages and limitations

Compact fluorescent lamps:

No spotlight - Because CFLs do not project a focused beam is used as an LED lamp, which are best for lighting the area.

Sensitivity to temperature - energy saving light bulbs are sensitive to heat, their lives will be diminished if the device will not heat properly discharged. CFLs are also affected by the cold. CFL takes much longer to reach full brightness in coldWeather. In extreme situations, can not heat properly.

Warm-up time - LED on immediately, while compact fluorescent lamps take a few minutes to heat and provide maximum brightness.

Hazardous waste - energy saving bulbs contain mercury and must be disposed of properly. The EPA provides the proper disposal site. LEDs contain no mercury.

Cycling often reduces the life - in high traffic areas such as bathrooms at home, where energy saving lamps and out often, theirLife is sinking fast.

CFL bulbs can emit UV light that can not be desirable for some applications - UV.

LED:

High cost - The LED lamps themselves are expensive, but the initial investment is recovered quickly in lower bills.

Heat generation - Some high-power (5 W and higher) can cause significant heat LED lamps. Heat sinks are often made in the same light bulbs and can some LED devices to ensure the necessaryadequate airflow.

LED lights are the right choice for energy efficient lighting because of their different lighting options, and the ease with which the light emission can be layered and controlled when compared to CFL bulbs.


LED lamps with energy saving lamps

Sudanese Music Order Buying Wireless Invisible Fence


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。







Sponsor Links